post

Simple Ways to Find a Stud in a Wall

There are times when locating a stud behind the ceiling surface or wall is useful. For instance, when anchoring a wall cabinet, it is essential to secure it to established framing members instead of just hanging it on the drywall. We take a look at the most efficient ways to find a stud without necessarily spending a lot of money.

 Use a Tape Measure

Starting at the corners studs are spaced at an interval of 16 inches on center. There are, however, instances when the walls are framed differently such as when 2 x 6 lumber makes the studs. Nonetheless, in most houses, the 16 inches on-center rule applies.

As a matter of fact, a carpenter tape measure has 16 inches increments, typically highlighted in red. Even though this technique is useful, it is not accurate enough. You may want to pinpoint the exact location before you start pounding nails.

 Use a Drill Bit or a Finish Nail

For better results, drive a thin finish nail or a small drill bit into the wall. Be sure to punch a small row of tiny nails to locate the stud. This method allows you to spot the wood fragments on the nail or drill bit when you hit the stud. You will have to paint the wall later on.

Use a Stud Finder

Clearly, this method is not specifically linked to other options we’ve discussed here. It is arguably the best way to find a stud in a wall. Stud finders come in two forms. There’s a small magnetic tools that works by sensing the location of nail heads. These require a bit of technical know how to use though and will only locate the stud exactly at nail or screw locations.

A better alternative is an electronic stud finder. This works by sensing the density of the wall. To use it;

  • Start by placing it 6 to 8 inches to the left of the general location of the stud. Slide it to the right and be sure to press the button on the bottom
  • When the machine beeps, that’s an indication it has located the stud. Stop moving it and mark this point with a pencil or masking tape.

Repeat the same process on right side, by moving the stud finder to the left. Again, mark the point where it lights up or beeps. You have now located the right edge of the stud.

post

Roles That Divorce Lawyers Play to Help Win Your Case

Divorce lawyers focus on issues that touch on legal separation including dissolution, divorce, separation and annulment. You need such a lawyer if you are starting or going through a legal separation process. You don’t have to wait until the process s proceeded too far before you consult the lawyer – you need to work with him or her right from the start. So, what are does the divorce lawyer bring to the table?

Helps You to Know Your Goals

Before you fill any paperwork, the divorce lawyer sits down with you and discusses the details of the case. The aim is to find out whether you have enough and valid reasons to file for divorce successfully. The lawyer also gives you a clear picture of the scenario and possible outcomes.

Part of the divorce advice you get from the lawyer is about your role in the case. You also get to set your specific goals in the case and work towards them.

Assists Your Prepare Documents

You need to have documentary evidence when you present the case to court. The lawyer lets you know what types of documents you need and how you can collect them. He or she also helps you to complete the necessary forms the right way to prevent delays in the case. One of the documents the lawyer helps you prepare is the summons letting your spouse know that you are filing for divorce.

Collects Relevant Information

The lawyer helps collect relevant information regarding the divorce. For instance, you need financial and personal information regarding your spouse to determine how the settlement will go. The lawyer has the ability to do just that. Other documents include child custody arrangements, visitations and property-related data such as title deeds and mortgages.

Acts as an Intermediary

At times you might decide to settle your issues out of court. In such a circumstance, the lawyer acts as the mediator. This is an ideal role because divorce lawyers have handled such cases before and know what to do. Don’t worry, any decision you make out of court in front of the lawyer follows the correct legal procedure, and is legally binding for both of you.

Final Thoughts

Make sure you work with a lawyer that is impartial and experienced in the field of divorce. The lawyer should have handled similar cases before successfully. Ask for testimonials from previous clients and get a part of their story. The way the lawyer handles the case tells you whether you are working with an expert or a noob. Using a lawyer to handle your divorce case makes everything quick and smooth, eliminating additional stress.